video
CNC Water Cutting Machine

CNC Water Cutting Machine

CNC Water Cutting Machine BCTC BHLWJ 4020 5 Axis CNC Water Cutting Machine for Stone, Glass, Ceramic and Metal How Water Becomes a Cutting Tool? The CNC Water Cutting Machine uses kinetic energy to perform cuts, rather than mechanical cutting. A booster pump pressurizes water, and the high...

Product Introduction

CNC Water Cutting Machine

 

BCTC BHLWJ 4020 5 Axis CNC Water Cutting Machine for Stone, Glass, Ceramic and Metal

 

4
How Water Becomes a Cutting Tool?

The CNC Water Cutting Machine uses kinetic energy to perform cuts, rather than mechanical cutting. A booster pump pressurizes water, and the high pressure water stream passes through nozzles with an orifice diameter of no more than 0.33 mm.

When switching processing materials, there's no need to change the cutting head; simply select whether to add garnet abrasive. The BHLWJ 4020's single cutting head is compatible with two processing modes; switching parameters allows for easy switching, reducing downtime for part changes and helping to improve production efficiency.

 

1

 

Why is slab utilization improved?
 

The kerf of a CNC waterjet cutting machine is only 0.5–1.0 mm, which is the key to improving slab utilization.

Cost saving

The cost advantage of material savings is particularly pronounced when processing high end marble.

automation

Weihong controllers import DXF/DWG drawings and automatically optimize the cutting path through material nesting.

consistency

Cold cut edge precision is stable, and stone textures fit together seamlessly, eliminating material waste from secondary cutting.

 

Proven Advantages of Cold Cutting Technology

The CNC Water Cutting Machine employs a purely cold cutting process, fundamentally avoiding material damage caused by hot processing.

Its practical production advantages are significant:

Feldspar materials such as granite

The cold cutting process effectively preserves the original structural strength of the stone, greatly reducing the risk of subsequent cracking and breakage.

Metal materials such as stainless steel and aluminum alloys

The processed edges do not undergo high temperature hardening, simplifying the process and improving the consistency of the finished product.

Coated panels and composite laminates

The cutting process is at a gentle temperature, resulting in a clean and intact finished product surface and a higher yield rate.

 

Why can this equipment achieve such precise processing?

 

This is also where our advantage lies.

7

 
 

8

 
 

 This equipment employs a large stroke, high precision motion structure, with an X axis travel of 4000mm and a Y axis travel of 2000 mm.

 It is suitable not only for standard 3200×2000 mm sheets but also for processing larger 3600×2100 mm sheets. Overall cutting accuracy reaches ±0.1mm, with a repeatability of ±0.05 mm.

 Combined with ±60° A axis reciprocating motion and ±360° C axis full range rotation, multiple 3D contours can be processed in a single setup, eliminating the need for secondary alignment and clamping.

 

 

 This equipment features a practical breakpoint resume function, automatically recording the coordinates of processing breaks and resuming processing from the breakpoint upon restarting. This effectively avoids sheet metal scrap and material waste, significantly reducing production losses.

 

 

The Consumable Ledger

 

Abrasive is the largest recurring cost on a CNC water cutting machine after electricity. The BHLWJ 4020 adds a CNC controlled abrasive flow valve that closes during program pauses, head lifts and table repositioning, and waste garnet is screened and cleaned in the collection system, with 40–60% recovered for reuse on less demanding work. There is also no blade to buy, dress or retire.

6

Consumable Cost Control

 

 The CNC Water Cutting Machine primarily uses garnet abrasive. The BHLWJ 4020 employs a CNC abrasive flow valve that automatically cuts off the abrasive supply during pauses, cutting head raising/lowering, and table resets, preventing material waste caused by idling. 

 

5
 
Equipped with an abrasive recycling system, 40%–60% of used garnet abrasive can be recycled and reused after screening and cleaning, reducing consumable costs.
3
 
The equipment requires no blades, saving on the costs of blade procurement, sharpening, and replacement, as well as downtime.

BHLWJ 4020 Machinable Materials and Application Scenarios

Granite

 

Application:Washbasins, unfinished tombstones, heavy building components, etc.

Marble, limestone

 

Application:Countertops, textured wall panels, embedded components, waterjet art mosaics.

Quartz, artificial stone

 

Application:Standard large slabs and extra large slabs, sinks, and irregularly shaped cooktop parts.

Glass and ceramics

 

Application:Architectural glass, water barriers, ceramic tiles, thermal insulation pads.

Metal

 

Application:Stainless, aluminium, brass - brackets, edge profiles, composite panels.

 

Installation in Place

 

CNC machining Manufactruing process

 

 

Site preparation is the most easily underestimated step and a common cause of commissioning delays.

 

The equipment weighs 5000kg. It is recommended to lay a reinforced concrete foundation at least 150mm thick to buffer the vibration of the booster pump; most standard industrial concrete floors are sufficient.

9
1

 

Supporting utilities: Three phase 380V/50Hz power supply; maximum working pressure 400MPa; and wastewater discharge pipeline containing abrasive waste.

 

BCTC provides foundation construction drawings and a pre installation checklist with the order to facilitate customer site preparation in advance.

 

 

Technical Specifications

 

 
 
product parameters
Parameter System integration/Automatic Production Line
X axis stroke 4000 mm
Y axis stroke 2000 mm
Z axis stroke 80 – 130 mm
A axis (swing) / C axis (rotation) ±60° / ±360°
Fast positioning speed 6500 / 15000 mm/min
Cutting accuracy ±0.1 mm
Repeat positioning accuracy ±0.05 mm
Gross weight 5000 kg
Certification CE, ISO 9001

 

 

BCTC Support and Spare Parts

 

01.

Qualification Certification

Each BHLWJ 4020 unit comes with a 12 months warranty and is CE certified by the European Union.

02.

Commonly used consumables are kept in stock

Pressure boosting seals, sapphire orifice plates, nozzle assemblies, etc., with year round inventory to minimize downtime.

03.

Remote Technical Support

Programming operation and parameter setting issues can be quickly troubleshooted and resolved via remote screen sharing.

04.

On site Service

For hardware faults that cannot be resolved remotely, BCTC will arrange for technicians to provide on site assistance.

countertop cutting

5 axis water jet cutting

Request a Cutting Assessment

 

 Please send three DXF files of materials used in your daily production. We will provide you with simulated cutting times and abrasive consumption using BHLWJ 4020. Before your confirmation, we will also cut your material using a test piece to visually verify the cut and edge quality, reducing procurement decision making risks.

 

 

Contact now

 

 

 

Hot Tags: cnc water cutting machine, China cnc water cutting machine manufacturers, suppliers, factory, 5 axis water jet cutting machines, cnc water jet cutting machine, stone waterjet cutting machine, water jet for stone cutting, water jet stone cutting, waterjet cutting machine marble

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag