Marble Block Cutter

Marble Block Cutter

The six-cylinder gantry multi-blade block cutting machine uses diamond tools and high-speed cutting technology, which is suitable for high-efficiency cutting of stone slabs of various thicknesses. For example, thicknesses of 17mm, 20mm, 30mm, etc. Main Features: Open Frame Design: The granite...

Product Introduction

marble Block Cutter

The six-cylinder gantry multi-blade  block cutting machine uses diamond tools and high-speed cutting technology, which is suitable for high-efficiency cutting of stone slabs of various thicknesses. For example, thicknesses of 17mm, 20mm, 30mm, etc.

 

block cutting machine manufacturers

Main Features:
  • Open Frame Design: The marble Block Cutter features an open structure that provides easy access for daily inspections and component servicing, making maintenance simpler and more efficient.

  • Sturdy Cast Iron Frame: The core components are made of high-strength cast iron and premium parts, ensuring the marble Block Cutter delivers stable cutting performance even during long-term, heavy-duty operation.

  • Efficient Lift System: The rapid lift design significantly shortens stone cutting cycles and improves overall cutting efficiency.

  • Balanced Wedge-Shaped Chisel: Its wedge-shaped design ensures balance and conforms to the stone surface for sharper, more precise cuts.

  • High-Carbon Steel Heat-Treated Chisel: Made from high-carbon steel and fully heat-treated for hardness, the chisel ensures consistent and reliable cutting performance.

marble Block Cutter

 

 

 

details Images

 

2025-09-27135249955

6 big strong pilllars

sliding guide for spindle
Covered by fabric for preventing pollution.

2025-09-27135305716

Linear Hinwin

Famous products, top quality use on crossbeam and carling for good performance.

2025-09-27135310084

Circle Blade

Up to 18 pieces of blade can be hanged for efficient production of thin slabs.

2025-09-27135313900

Electronic Control System

Famous product, equipped for good stability and high automation performance.

Common  Problems and Solutions

 

1

If the operating buttons (front, back, left, right, up, and down) do not work, this is usually due to a malfunctioning pushbutton switch, loose wiring, a malfunctioning limit travel switch, or a faulty lift contactor. Check the wiring, replace the pushbutton switch, tighten the wiring connector, replace the travel switch, press the forward and backward travel button, and then press the automatic button to automatically move the cutter back and forth and lower the blade. Replace the contactor to ensure sensitive and reliable operation.

2

Motor burnout is generally caused by excessive mechanical resistance, a damaged worm gear bearing, or poor contact in the AC contactor. The transmission system should be inspected to reduce resistance, relubricate, and replace bearings or contactors.

3

Uneven blade speed during machine lowering is commonly caused by air in the oil line, vibration during lifting, a stuck speed control valve spool, the machine being able to lower but not rise, a stuck solenoid valve spool, or unclean hydraulic oil. Appropriate solutions include removing the oil line to vent air, adjusting the balancing valve, replacing the speed control valve, cleaning the spool, replacing the relief valve, replacing the solenoid valve, and cleaning the spool.

4

Frequent tripping or unusual noises in the AC contactor are likely due to insufficient voltage, poor coil quality, burnt wire, or impurities on the core surface. Solutions include checking the power supply voltage, removing the poor-quality coil and replacing it with a reliable one, and cleaning the core (scraping it clean with emery cloth or a sharp knife).

5

While each of these faults is unique, they can all be resolved through careful inspection and maintenance. During daily operation, maintaining adequate lubrication and regularly inspecting electrical components and transmission parts can effectively extend equipment life and reduce unplanned downtime.

 

 

Hot Tags: marble block cutter, China marble block cutter manufacturers, suppliers, factory, multi-cutter, Multi Blade Granite Cutting Machine, multi blade cutter, multi cutter machine, Block Stone Cutting Machine, stone block cutting machine

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag