Methods Of Cutting Large Stones

It is mainly divided into frame saws and disc saws. Frame saws are further divided into diamond frame saws and steel sand frame saws. Advantages of diamond frame saw: it can only cut soft stones such as marble, and the loss rate is lower than that of sand saws. The disadvantage is that the trip is slow and the time is long. Advantages of sand saws: Sand saws are all cut hard stone, that is, granite. The sand saw can cut a large board surface, and the flatness and thickness of the cut large plate are much better than that of the disc saw, and the disadvantages are: slow speed and high loss. In cutting, emery and lime need to be added, which is polluting. Disc saws are divided into single blade saws and combination saws. The advantage of a single-rip saw is that it can cut small parts of the stone block according to the size you need, and the speed is fast. The disadvantage is that it is easy to cut crookedly, and the combination saw needs to be adjusted frequently, in fact, it is a combination of many pieces of single-piece saws together, and the cutting efficiency is very high, yes, the disc saw can not cut too high stone because of the limitation of the radius, and the basic domestic use is to cut below 90 cm. 1 meter to 1, 5 also available