Maintenance and care of block stone cutting machines are crucial, directly affecting their lifespan and cutting efficiency.
The following are key maintenance points for block stone cutting machines:
Daily Maintenance of Block Stone Cutting Machines:
1. After finishing work, clean and dry the working chamber and worktable surfaces of rock debris. Clean the machine tool and guide rails daily.
2. Regularly check the horizontal and vertical guide rails and rack surfaces for lubrication. Replenish as needed to ensure good lubrication at all times.
Weekly Maintenance of Block Stone Cutting Machines:
1. Perform a thorough cleaning of the machine and strictly follow lubrication requirements for adding and changing lubricating oil.
2. Inspect and replace any damaged rail wipers.
3. Check the sensitivity of limit switches, travel switches, etc. Replace any abnormalities immediately.
Block Stone Cutting Machine Monthly Maintenance:
1. Check the main air inlet for blockages and ensure unobstructed airflow.
2. Check for damage to connectors and pipes.
3. Check for loose fasteners. Tighten any loose fasteners immediately.
4. Check that the clearances of all moving guide rails are within acceptable limits.
5. Check the functionality of all buttons and selector switches.
Other Precautions:
1. Safe Operation: Before performing any maintenance work, always turn off the power and disconnect the air supply; wear protective eyewear, gloves, and other protective equipment to ensure your safety.
2. Professional Repair: Maintenance of the cutting machine is best performed by qualified personnel to ensure quality and safety.
3. Instruction Manual: Before performing any maintenance work, carefully read the cutting machine's instruction manual to understand the equipment's structure and working principle.
4. Regular Maintenance: The cutting machine should be maintained regularly to ensure its normal operation and extend its service life.
