What kinds of ceramic tile cutters can be processed for deep processing of ceramic tiles?

Tile cutter is a decoration industry and ceramic tile processing industry commonly used equipment, and has a lot of different models, its function and processing methods are also different, because the equipment in the daily use of the frequency is very large, so it is necessary to understand the common faults and solutions of the equipment, so that can provide production efficiency, but also to avoid unnecessary trouble and loss, let's talk about it.

Common faults are:
a. If the rotation of the bearing head is noisy or inflexible, it can be solved by replacing the bearing.
b. If the bearing head does not rotate and does not rotate, it may be that the motor is damaged, and the motor can be replaced.
c. The load is too heavy, this needs to check the blade, it may be that the tile cutting blade is not sharp enough, if so, the blade can be replaced.
d. If the two sides of the tile are broken, there are many reasons, one may be that the blade is not sharp, the second is that the water cooling is not enough, the three rails are not parallel to the four guide wheels, and the fourth is the head bearing is damaged. If it is a one-sided chipping, check whether the cutting blade and the track are on the same parallel line.