Ceramic cutting machine operation method
Straight cut
Adjust the cutting machine head to make the saw blade and the workbench perpendicular, fix the angle of the saw blade by locking the handle, and adjust the upper and lower positions of the saw blade relative to the workbench through a pair of limiting bolts, as shown in the following figure. Then put the stone or other building materials flat on the workbench, turn on the switch, the blade rotates, and when the water pump starts to draw water, push the workbench forward so that the blade cuts the material on the worktop as required.
45° chamfer cutting
The machine has a rotatable cutting head, which can do 45 degree cutting, please first rotate the machine head to 45 degrees as shown in the left picture below, tighten the lock handle ceramic, the ceramic cutting machine supply makes the blade align with the cutting material and push the workbench forward to make a 45 degree cut.
Ceramic cutting machine supply, ceramic cutting machine use
Jun 13, 2025 Leave a message
Send Inquiry








